1G HD over IP Transmitter

Download an HD over IP Projector Connector Specifications Sheet

The Projector Connector™ HD/IP™ allows you to simultaneously send out an HDMI® 1.3 Signal (up to 1080p) to one or more HDMI™ video projectors or LCD Panels and return an IR Control Signal  to the source using CAT5/6/7 cable over a standard Ethernet infrastructure.    Can be used to distribute HD digital content from multiple sources to up to 200 displays on a LAN by cascading Ethernet switches, allowing the farthest display to be located 1,000’s of feet away from the 1080p source device while sustaining  excellent picture & sound quality.  Each device is installed using 1 piece of UTP  or STP cable.  AV signals are transmitted digitally over the CAT5/6/7 cable without any signal loss.  The integrated Scaler function allows different input and output resolutions up to 2048x2048 (different output displays can be at different resolutions).  The Return IR Control function is best suited for a Point-To-Point application, and is of limited value in a Point-To-Many environment.  For installations in a Many-To-Many environment it is necessary to use a third party home automation solution to provide distributed remote control functionality.

NOTE: Support for multiple transmitters requires a Managed network switch with VLAN/IGMP support. Standard LAN switches can only support 1 transmitter.

Many-to-Many Home Theater Matrix

Any HDMI source can simultaneously be diplayed on any number of display devices (if multiple displays are permitted by the HDMI source) using VLAN isolation on a Managed Ethernet switch. Using the HTTP GUI a PC (wired or wireless) can control what signal is being watched at each location. Sophisticated Home Theater installations can use a programmable console to control the system using RS232 commands. The Managed switch must support IGMP and permit duplicate IP addresses across the VLAN domains.   You must use a third party home automation solution to provide distributed remote control functionality.

Projector Connector™ HDMI/IP Transmitter Specifcations (VBS-HDMI-308A)

1 UTP/STP 100Mbps Ethernet Port
Embedded HTTP Server
Protocol:  IP, UDP, TCP, ICMP, and IGMP
1 HDMI In (19 pin Type A female)
1 3.5mm IR Receiver Port (limited support)
Size:  5” W x 4.5” D x 1” H; 1.1 pounds
100-240V, 50/60 Hz, 5v DC Adapter - 1 Amp
HDCP Compliant
Plug-and-Play installation
Supports DVI with HDMI-to-DVI adapter
Video Bandwidth:  2.25Gbps (HDM1.3)
LAN Bandwidth: 50Mbps ~ 60Mbps for 1080p    
Input TMDS Signal:  1.2 volts (peak-to-peak)
Input DDC Signal:  5 volts (peak-to-peak)

Resolutions - supports practically any input resolution and frequency from 16 x 16 to 2048 x 2048 pixel image including the following popular settings:
640x480     @ 85fps    800x600     @ 85fps
1024x768   @ 75fps    1280x1024 @ 30fps
1600x1200 @ 30fps    720x480     @ 60fps
720x576     @ 50fps    1280x720   @ 30fps
1920x1080 @ 24fps    1920x1080 @ 60fps

Download an HDMI over  IP Projector Connector Specifications Sheet

NOTICE: HD over IP and HD/IP are global trademarks or registered trademarks of Just Add Power Cardware Co., Inc. HDMI™, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.