Video Genie™ DS1 3x10 Matrix Switch

Sat, 04 Jul 2009 20:19:59 +0100

The Video Genie™ DS series is the fourth generation of the Video Genie family. With 2 VGA (HDD15) inputs, plus a Microphone port, this matrix transmitter can simultaneously send either input to the 8 VBS Bus ports (Group A and Group B with up to 80 targets) and 2 local VGA ports. The new Video Genie DS1 includes an Infrared learning function (learns up to 48 IR commands), allowing the operator to perform the most common functions (play, pause, stop, etc.) without having to fumble with easily lost handheld IR remotes. The Video Genie™ DS1 is used to connect 2 computers (or HDMI/HDTV devices*) and common analog video devices (up to 4 VCR, DVD, Cameras, etc.) to VGA projectors and sound systems.

*HDTV/HDMI supported in 720p mode with the optional HDMI2VGA adapter and requires native signal compatible target devices.

Video Genie™ DS1 Specifications:
8 UTP/STP VBS Type B BUS Ports with RJ45 Terminators
2 VGA In (Supports 1600x 1200 UXGA)
2 VGA Out - Monitor & Projector
2 Stereo Line Audio In
1 Stereo Line Audio Out
1 Microphone In
1 AMP Line Out
1 RJ11 Panel Port for Console
2 RS232 Interface Port
4 RCA A/V Inputs
1 IR IN port for Learning IR Commands
4 IR OUT ports for IR Blasters (included)
Rack Mount Wings
100-240V, 50/60 Hz, AC Adapter - 1 Amp

VBS Suite Specifications Sheet

Price: $1,250.00

Dual Monitor VBS Type B Active Receiver

Sat, 04 Jul 2009 20:12:16 +0100

An Active Receiver can be attached to one or two output display devices and includes 2 local VGA IN ports (with sound), allowing the target presentation devices to display a local source with the DS transmitter is in BREAK mode. The Type B Active Receivers can be connected in daisy-chains allowing 10 and possibly more display monitors to be connected to a VBS Type B BUS port. A single Type B Passive Receiver can be connected to the end of an Active Receiver daisy-chain.

Dual Monitor Type B Active Receiver Specifications:

2 Stereo Line Audio In
2 Stereo Line Audio Out
2 VGA In (UXGA)
2 VGA Out
2 VBS Type B BUS IN/OUT Ports for CAT5e (UTP/STP)

Price: $225.00

Video Conference Upgrade for VBS/WCBS

Sat, 04 Jul 2009 20:30:31 +0100

An External Video Scaler for use with Projector Connector™ Type B Transmitter. Can be used to support a 2-way audio/video conference or "on the scene reporter" interview function when used in combination with the Video Genie. When used with Teacher's AIDE or EZ-Teach Silver, it gives you the ability to connect a DVD or other video source to the lab and broadcast it to the entire class.

Video Conference Upgrade Specifications:

Video standards: NTSC/PAL/SECAM (for Composite and S-video)
Resolution output: 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024/1440 x 960 (60 Hz)
Local Monitor support: VGA/SVGA/XGA/SXGA (VGA input port required)
Input ports: coaxial (RF), composite video, S-video, composite audio, PC sound card line-out and 7.5 V / 1 A power port
Output ports: HD15 (VGA) and 3.5mm stereo output for connection to the Projector Connector Type B transmitter.
No driver or operating system requirements; compatible with Windows and Mac computers

Price: $100.00

Total Control Console™

Sat, 04 Jul 2009 19:23:37 +0100

The smooth sensor panel in the Total Control Console™ provides easy stand alone operation of the Video Genie™ DS system without requiring a dedicated PC to control the system.

Total Control Console™ Specifications:
1 SETUP Mode Key
4 Programmable Function Keys
5 Output Target Select Keys
12 Infrared Control Keys (can save 4 sets for 48 total IR commands)
6 Source Select Keys
1 Broadcast Key
1 Darken Key
1 Mute Key
1 Break/Reset Key
1 RJ11 Port for Video Genie™ DS Panel connection
9.5” W x 9.0” D x 1.75” H
Weight - 1 pound

VBS Suite Specifications Sheet

Price: $550.00

HardGuard V4 PCI

Sun, 12 Jul 2009 18:01:21 +0100

What is HardGuard™?
HardGuard is a computer card that protects you from computer software disasters caused by viruses, Windows blue screen conditions, registry errors, etc. It even protects CMOS settings. So if you get smacked with a virus, system crash, user error or other calamity, just tell HardGuard to restore your computer to the backup version it has hidden away. Within seconds, you're back in business, as if nothing ever happened.

How does HardGuard™ work?
When your computer is set up and operating exactly the way you want it, you save the hard drive image using HardGuard's BACKUP feature. BACKUP is on your startup menu, along with RESTORE and NORMAL. You may have guessed by now that you can select BACKUP, or RESTORE when you start your system. BACKUP saves everything about your computer the last time you used it. If you select RESTORE, your system is restored to the last BACKUP image you saved. If you just want to use your computer the way you did last time, select NORMAL and you get the same software you had last time.

Then if you get hit with a virus or another problem rears its ugly head, simply press reset and tell HardGuard to restore your hard drive to the last backup you made. Within seconds, you're up and running again.

Will the "backup" process take a lot of space on my hard drive?
No, HardGuard™ protection technology takes practically no space at all. The only "lost" space you encounter with your HardGuard is the size of the files that you modify between your "backups". Applications typically keep their changes in small files (i.e. INI files), while the main content of your applications (and operating system) are in files that are never changed (i.e. EXE, COM, DLL, etc..). All that is left on your HDD is your data files. The typical user creates data files that are relatively "small" in comparison to the size of their HDD. The HardGuard keeps your protected data files, applications, and operating system available for instant restoration at your command (it really does happen in about 2 seconds!). You can use your Hard Guard effectively on a system with 95% of the hard drive consumed by your applications and data.

Will HardGuard™ help me if my hard drive has a mechanical failure?
Maybe. It depends on the type of mechanical failure. We strongly suggest that you should still make routine offsite backups of your critical files, as the HardGuard won't save you from fire or theft!

Is HardGuard™ easy to use?
Easy as pie. You only have three options to choose from in HardGuard's start menu: Normal Boot, Restore Hard Drive and Backup Hard Drive. (Pretty simple, right?)

Does HardGuard™ back up my hard drive automatically?
No. It's up to you to back up your hard drive. When your hard drive is set up and operating precisely the way you want it to, tell HardGuard to back it up—a process that literally takes seconds. (Keep in mind that HardGuard always restores your hard drive to the last backup you make, so be sure that everything is okay before you back up.)

How often should I back up my hard drive?
As often as it takes for you to have your important settings and information under HardGuard's protection—something that differs for every person and computer. In a school environment, you may only need to backup the system once per year!

How fast does HardGuard™ back up or restore my hard drive?
It usually takes HardGuard less than a minute to back up your hard drive. And it only takes a few seconds to restore your hard drive to your backup version.

But aren't software programs just as good?
NO! HardGuard is different—and better—because it works on the BIOS level of your computer—the most basic level of information there is in a PC. No software program does this. That's because most software programs work on higher levels by writing into your operating system and storing information in your hard drive. That means their protection is worthless if you have software failure, which causes 90+% of all computer problems. But HardGuard completely restores your hard drive because it works a step below—on the BIOS level—where nothing can corrupt the information it has stashed away.

Does HardGuard™ have a security feature?
Yes. HardGuard has a password and supervisor menu that gives you complete control over HardGuard activity—and therefore what's on the hard drive. Users (like your kids and roommates) cannot access HardGuard without your password, so any changes they make can be "reversed" when you restore your hard drive to the last backup you made. The bottom line is your hard drive is locked up like Fort Knox.

How can I be sure HardGuard™ will work with my computer?
HardGuard is designed to work in most makes and models of PC computers. It works with DOS, Windows 3.1, Windows 9X & Windows ME, Windows NT, Windows 2K, Windows XP, and Windows Vista operating systems. HardGuard does not work in Linux, Apple Macintosh, or PowerMac computers.

Is HardGuard™ difficult to install?

No! HardGuard comes with complete instructions for an easy, fast installation. It normally takes 3 to 5 minutes for a typical installation. (Don't worry, if you can plug in a lamp, you can install this card.)

Will HardGuard™ affect any of my computer programs?
No. HardGuard does not affect any computer programs because it works on the BIOS—or lowest—level of your computer; all software programs work on higher, more unstable levels.

Will HardGuard™ affect computer speed?
You should not notice any difference in your computer's speed.

Remember, the Hard Guard is a hard disk protector. When you install your Hard Guard the card links to your system BIOS and takes control of all HDD I/O functions. At the time of installation (and whenever you "backup") your Hard Guard identifies all the areas on your HDD that have information, and prevents any application (or virus) from writing to those areas. Your system will still be able to read the information and use the files. Whenever you attempt to modify a "protected" file, the changes are redirected to a different location on your HDD. The original unchanged files are kept hidden from the system. It is sort of like having a "read only" hard drive. This redirection to the changed files is totally transparent to your applications. The overhead for the redirection is measured at the nanosecond level and is practically so quick that it doesn't cause any noticeable delay from the perspective of a user.

Will HardGuard™ fix a problem in my computer when I install it?
No! HardGuard is a protection device for your hard drive, not a remedy for a sick computer.

Can I get help if I have a problem installing HardGuard™?
Yes. There is a Technical Support page on this website to provide assistance. You can also e-mail Feedback questions to us or call (800) 615-0206 if you prefer to talk to an actual person.

Will there be a problem if I uninstall HardGuard™?
No. Uninstalling a HardGuard card takes only minutes and will not affect the operation of your system or software. You can contact our Technical Support staff at (800) 615-0206 to walk you through it if you run into a problem.

If I buy a new computer, can I take the HardGuard™ card from my old computer and use it in my new one?
Yes. HardGuard is designed to work in most PC computers.

Is there a HardGuard™ version for Macintosh?
Sorry, currently there is no HardGuard version available for Apple Macintosh or PowerMac computers.

How much does HardGuard™ cost?
The retail price is $59 plus shipping and handling. Please call for education discounts and volume pricing.

Is HardGuard™ available in computer stores?
Please call us to find the name of your nearest dealers. We can be reached at at 1-800-615-0206.

Is there a warranty?
HardGuard has a one-year warranty covering the performance of the computer card against defective workmanship.

What if I "just don't like it?"
No problem. HardGuard comes with a 30-day money back guarantee. If it doesn't do what we say it will, take it out of your computer and send it back to your dealer with all original packaging. It is our "no hassle policy" to refund the purchase price immediately, no questions asked. (Sorry, refund is less a 15% restocking fee and doesn't include shipping and handling.)

But we know you'll be hooked once you try it, so we're not going to lose any sleep at night

Price: $59.00