Just Add Power - Latest Products from Category: Worship Center Broadcast System

Projector Connector™ Pass Through Receiver

Sat, 04 Jul 2009 20:46:25 +0100

This 4:3 and 16:9 aspect ratio receiver can be connected individually or in the middle of a daisy-chain to your choice of VBS Suite™ Type B compatible Transmitters. This "always on" receiver is for long distance applications up to 500 ft. There are 2 fine tuning knobs for focus and gain, allowing you to get the optimum picture quality with the longest of cable runs. You can then connect another Type B Receiver, to extend the audio/video signal up to 1500 ft (using 300M Extended Distance Receiver), or 700 ft (using Type B Standard Receivers).

Projector Connector™ Pass Through Receiver

1 UTP/STP VBS BUS In Ports - up to 150M
1 UTP/STP VBS BUS Out Ports - up to 300M
1 VGA Out; 1 Stereo Line Audio Out
100-240V, 50/60 Hz, AC Adapter - .5 Amp
2 Fine Tuning Knobs (Focus and Gain)
Total BUS Cable Distance up to 1,500’ (450 Meters)

Projector Connector Type B Specifications Sheet

Price: $250.00

Projector Connector™ Type B Passive Receiver

Sat, 04 Jul 2009 20:02:34 +0100

This 4:3 and 16:9 aspect ratio receiver can be connected individually or at the end of a daisy-chain to your choice of VBS Suite™ Type B compatible Transmitters. This "always on" receiver is available in several precisely tuned models to accommodate twisted pair cable lengths up to 60 Meters (200 ft.) for high resolution images. With high quality video grade twisted pair cables even longer distances can be achieved.

Receiver Specifications:

Outputs – VGA * 1, Stereo Audio * 1 (3.5mm mini-plug)

Power – 12V DC Adapter is included with Receiver

Connectivity – 1 Shielded RJ45 port (Shielded Twisted Pair cable recommended)

Models – 6 Standard STP Cable lengths supported:

10, 20, 30, 40, 50, or 60 Meters

Projector Connector Type B Specifications Sheet

Price: $150.00

Projector Connector™ Type B Extended Distance Receiver

Sat, 04 Jul 2009 20:07:46 +0100

This 4:3 and 16:9 aspect ratio receiver can be connected individually or at the end of a daisy-chain to your choice of VBS Suite™ Type B compatible Transmitters. This "always on" receiver is for long distance applications up to 1,000 ft. There are 3 fine tuning knobs for rough focus, fine focus, and gain, allowing you to get the optimum picture quality with the longest of cable runs.

Extended Distance Receiver Specifications:

Outputs – VGA * 1, Stereo Audio * 1 (3.5mm mini-plug)

Power – 12V DC Adapter is included with Receiver

Connectivity – 1 Shielded RJ45 port (Shielded Twisted Pair cable recommended)

Supports distances from 60M to 300M(200' to 1,000')

3 fine tuning knobs (Gain/Focus Adjust)

Projector Connector Type B Specifications Sheet

Price: $325.00

Video Genie™ DS1 3x10 Matrix Switch

Sat, 04 Jul 2009 20:19:59 +0100

The Video Genie™ DS series is the fourth generation of the Video Genie family. With 2 VGA (HDD15) inputs, plus a Microphone port, this matrix transmitter can simultaneously send either input to the 8 VBS Bus ports (Group A and Group B with up to 80 targets) and 2 local VGA ports. The new Video Genie DS1 includes an Infrared learning function (learns up to 48 IR commands), allowing the operator to perform the most common functions (play, pause, stop, etc.) without having to fumble with easily lost handheld IR remotes. The Video Genie™ DS1 is used to connect 2 computers (or HDMI/HDTV devices*) and common analog video devices (up to 4 VCR, DVD, Cameras, etc.) to VGA projectors and sound systems.

*HDTV/HDMI supported in 720p mode with the optional HDMI2VGA adapter and requires native signal compatible target devices.

Video Genie™ DS1 Specifications:
8 UTP/STP VBS Type B BUS Ports with RJ45 Terminators
2 VGA In (Supports 1600x 1200 UXGA)
2 VGA Out - Monitor & Projector
2 Stereo Line Audio In
1 Stereo Line Audio Out
1 Microphone In
1 AMP Line Out
1 RJ11 Panel Port for Console
2 RS232 Interface Port
4 RCA A/V Inputs
1 IR IN port for Learning IR Commands
4 IR OUT ports for IR Blasters (included)
Rack Mount Wings
100-240V, 50/60 Hz, AC Adapter - 1 Amp

VBS Suite Specifications Sheet

Price: $1,250.00

Projector Connector™ Type B Transmitter

Sat, 04 Jul 2009 19:53:12 +0100

The Point-To-Point Projector Connector Type B Transmitter allows you to simultaneously send a VGA Signal (up to 1280x1024) and a Stereo Audio Signal (3.5mm) to a video projector while only using 1 piece of UTP (Unshielded Twisted Pair) or STP (Shielded Twisted Pair) CAT5e or CAT6e cable. The system is precisely tuned to send a picture perfect image and stereo audio to the projector. Extends any VGA or high definition component display and analog L+R audio device up to 300 Meters*. This 4:3 and 16:9 aspect ratio transmitter can send Audio/Video to one or more VBS Suite™ Type B Receivers. Perfect for classroom and digital signage applications.

* The specific Type B Receiver purchased to go with the Transmitter will determine the supported cable distance. The Standard Type B Passive Receivers are available for STP cables up to 60M, and the the Extended Distance Type B Receiver is available to support cables up to 300M (1000').

Transmitter Specifications:

Inputs – VGA * 1 (PC or Laptop), Stereo Audio * 1 (3.5mm mini-plug)

Outputs – VGA * 1 (Local Computer Monitor), Stereo Audio * 1 (headset or desktop speakers)

Power – 12V DC Adapter is included with Transmitter

Connectivity – 1 Shielded RJ45 port (Shielded Twisted Pair cable recommended)

Projector Connector Type B Specifications Sheet

Price: $175.00

Dual Monitor VBS Type B Active Receiver

Sat, 04 Jul 2009 20:12:16 +0100

An Active Receiver can be attached to one or two output display devices and includes 2 local VGA IN ports (with sound), allowing the target presentation devices to display a local source with the DS transmitter is in BREAK mode. The Type B Active Receivers can be connected in daisy-chains allowing 10 and possibly more display monitors to be connected to a VBS Type B BUS port. A single Type B Passive Receiver can be connected to the end of an Active Receiver daisy-chain.

Dual Monitor Type B Active Receiver Specifications:

2 Stereo Line Audio In
2 Stereo Line Audio Out
2 VGA In (UXGA)
2 VGA Out
2 VBS Type B BUS IN/OUT Ports for CAT5e (UTP/STP)

Price: $225.00

Video Conference Upgrade for VBS/WCBS

Sat, 04 Jul 2009 20:30:31 +0100

An External Video Scaler for use with Projector Connector™ Type B Transmitter. Can be used to support a 2-way audio/video conference or "on the scene reporter" interview function when used in combination with the Video Genie. When used with Teacher's AIDE or EZ-Teach Silver, it gives you the ability to connect a DVD or other video source to the lab and broadcast it to the entire class.

Video Conference Upgrade Specifications:

Video standards: NTSC/PAL/SECAM (for Composite and S-video)
Resolution output: 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024/1440 x 960 (60 Hz)
Local Monitor support: VGA/SVGA/XGA/SXGA (VGA input port required)
Input ports: coaxial (RF), composite video, S-video, composite audio, PC sound card line-out and 7.5 V / 1 A power port
Output ports: HD15 (VGA) and 3.5mm stereo output for connection to the Projector Connector Type B transmitter.
No driver or operating system requirements; compatible with Windows and Mac computers

Price: $100.00

Total Control Console™

Sat, 04 Jul 2009 19:23:37 +0100

The smooth sensor panel in the Total Control Console™ provides easy stand alone operation of the Video Genie™ DS system without requiring a dedicated PC to control the system.

Total Control Console™ Specifications:
1 SETUP Mode Key
4 Programmable Function Keys
5 Output Target Select Keys
12 Infrared Control Keys (can save 4 sets for 48 total IR commands)
6 Source Select Keys
1 Broadcast Key
1 Darken Key
1 Mute Key
1 Break/Reset Key
1 RJ11 Port for Video Genie™ DS Panel connection
9.5” W x 9.0” D x 1.75” H
Weight - 1 pound

VBS Suite Specifications Sheet

Price: $550.00

Guiding Light Keyboard

Sat, 04 Jul 2009 15:44:49 +0100

Our Guiding Light™ Keyboard allows the Worship PC operator to see and control everything with ease, even when the house lights are turned off. The special design "cross-in-lights" LED pattern serves as a spiritual reminder to the technology team about the reason for their service. The Guiding Light™ Keyboard comes with the specially printed F Keys we've designed to match the functions of the Worship Center Broadcast System Video Genie™. The Guiding Light™ Keyboard is also available in a stand alone version without the special F Keys.

Guiding Light™ Keyboard Specifications:
104 Keys
Input power: 5V+/-5% 120mA
Travel distance: 3+/-0.2mm
Keyboard Cable: 74"
16.3"L x 6.7"W x 1.2"H
Weight - 1.5 lbs
Native USB Interface
PS/2 Adapter Included
Fully compatible with Windows 98/Me/2K/XP/NT/Vista

This computer keyboard is built with a patented process that allows us to use a different color LED underneath every key. The special characteristic in the Guiding Light™ Keyboard is a pattern of lights that form a Cross on the number pad when the LED's are turned on. The name Guiding Light™ is being used as both a traditional trademark, and also as a nontraditional trademark describing the special appearance of the product.
Price: $50.00